Quality, professional 3D printing resins

Resinous3D Model Material. (FL2 -002)

Designed as a general purpose resin, with good mechanical properties, high print definition, and which can be printed at 25um - 100um layer thickness

Typical Mechanical test Figures below are (green - as printed) / (post cure)

Typical UTS: 42Mpa / 68Mpa

Extension: 8% / 5%

Typical Flexural Modulus: 1.6Gpa / 2.4Gpa

Notched Izod Impact resistance 19 J/m / 30 J/m

(We recommend post curing this resin at UV power levels of 20mw/cm2 at 42c for best mechanical results over 30 minutes.)